GaraDry Threshold Seal Kits - 40mm high x officiel 175mm wide - Incs Sealant-WS0013

The Product & Its Purpose

• The 40mm(High) GaraDry Garage/Flood Seal has been designed to form a watertightseal between the garage doorand the floor.
• The product may also be usedas a flood barrier to prevent water from entering the garage.
• The producthas two uses; as a garage door seal and as a flood barrier.

The Problem and the GaraDry Solution

The 40mmhigh seal:

• Isdesigned to prevent wind-driven rainwater, dust and debris from being blownunder the garage door.
• The product is a viable alternative to fitting anaqua grid. The latter may prove to be both time-consuming and expensive.
• Specifically, it eradicates the damaging effects of wind-blown rainwater. Itmay also prevent small rodents from entering thegaragereducesthe damaging effects of condensation (i.e. rusting) by keeping the garage dryand equipment and toolsprotected. Additionally, energy costs may be reduced asa result of heat conservation.
• Is robustand will stay in position when driven over by vehicles.
• Is availablein six lengths ranging from 2.0m (6'6”) to 6.17m (20'3”).
• Isavailable as a GaraDry Kit (containing a length(s) of seal , a black MSpolymer sealant, a sealant cartridge and fitting instructions)
• The GaraDryfloor seal has been designed and developed by a qualified BritishIndustrial Designer and is protected byaCommunity Design Registration(002188102)Trademark (2484335) (2524041) The domain names secured.

GaraDry Floor Seals Are Suitable For:

• Up and over garage doors
• Side hinged garage doors

• Roller garage doors

• Industrialroller shutter doors

• Sectional garage doors

• Industrial sectional doors

The GaraDry Kit Includes:

• GaraDry length

• Black MS polymer sealant

• Fitting instructions

The Yellow Strip

The FloorSealis available in 9 lengths (2m - 6.17m) andhas adepth of 40mm and width of 175mm.

Serrated Grooved Base

The Thermoplastic (Material)

TheGaraDryFloor Seal is made from high quality thermoplastic that is bothenvironmentally friendly andrecyclable.

The Design

TheGaraDryfloor seal has been designed and developed by a qualified BritishIndustrial Designer.The product is protected by a Community DesignRegistration (002188102) Trademark (2484335)